Kramer-electronics VS-3232DN Manual de usuario descargar pdf (Pagina 33)

VS-3232DN - Using the Configuration Menus 29

6. Press TAKE.

The EDID is stored and passed through to the input.

The display reverts to the output/input display.

7. Repeat the above steps for the next batch of eight EDID assignments.

To view the EDID assignments:

1. Press MENU.

The Setup Menu options are displayed.

2. Press 7 (EDID) on the numeric keypad (see

Figure 1).

The following is displayed:

SETUP EDID

ENTER to View EDID and Set EDID

3. Press ENT.

The current EDID matrix configuration is displayed. In this example, input 07

is assigned to output 05, all other EDID values are default.

05 06 07 08 09 10

8.1.4 Setup Menu—9: Delay, Setting for an Output

Some displays require a delay in the negotiation of data between the display and

the switcher for reliable negotiation of data between them. This option sets the

time delay for an output which lapses between entering a switching action and the

execution of the action. This delay can be set for each output independently. The

delay is defined in units of 200ms and ranges from 0 to 15, providing delays of

between 0 and 3 seconds (15 x 200ms = 3 seconds).

To set the execution delay for an output:

1. Press MENU.

The Setup Menu options are displayed.

2. Press 9 (DELAY) on the numeric keypad (see

Figure 1).

The output/delay times display is shown.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 79 80

Sin comentarios

Kramer-electronics VS-3232DN Manual de usuario Pagina 33