Kramer-electronics VS-3232DN Manual de usuario descargar pdf (Pagina 23)

VS-3232DN - Operating Your Video Matrix Switcher 19

When the unit is powered-on, the last matrix setup that was used is loaded. Use

either the recall setup (see

Section 8.1.6) or default setup recall (see

7.4.5Section

Records a stored configuration from a preset. For quick retrieval, you can program a default

setup that is commonly used.

) functions to retrieve other setups.

7.1.1 Viewing the Display

Figure 9 shows the output-input matrix on the LCD display. The LCD display can

show 13 out of the 32 available matrix combinations at once. To view any of the

matrix combinations use the ◄ or the ► buttons on the front panel to shift the

sliding window to the right or left.

This sliding window functionality is enabled when:

• The switcher is in between operations

Waiting for its next operation while all previous operations are complete or cancelled.

• Recalling a setup using the ◄ or ► buttons

When entering an output/input combination, the contents of the LCD

display automatically shift to indicate the current status of the

selected output.

7.2 Using the Selector Buttons

For numbers between 1 and 9, the VS-3232DN can handle two digit numbers as

well as single digit numbers. When entering a single digit number (for example 5),

you can either press 0 followed by 5, or 5 followed by ENT.

Pressing 00 (or 0, ENT) is only relevant for an input selection and is used to

disconnect the currently entered output number from the input.

For example, the following display indicates that inputs 8 and 12 are disconnected

from any output (note that in the second line representing these inputs the display

is blank):

06 07 08 09 10 11 12 13

08 10 14 13 06

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

Sin comentarios

Kramer-electronics VS-3232DN Manual de usuario Pagina 23