Kramer-electronics VP-773AMP Manual de usuario descargar pdf (Pagina 18)

VP-773AMP - Connecting the VP-773AMP

6. Connect the HDMI 1 OUT connector to an HDMI acceptor (for example, a

plasma display).

You can also connect the HDMI OUT 2 output (not shown in Figure 4)

7. Connect the HDBT RJ-45 connector to a receiver (for example, the Kramer

TP-580Rxr).

8. Connect the AUDIO LINE OUT Terminal Block connector to a balanced

audio acceptor and the S/PDIF OUT RCA connector to a digital audio

acceptor (not shown in Figure 4).

9. Connect the SPKR OUT block connector to a pair of loudspeakers, by

connecting the left loudspeaker to the “L+” and the “L-” terminal block

connectors, and the right loudspeaker to the “R+” and the “R-” terminal block

connectors. Do not Ground the loudspeakers.

10. If required, you can connect a PC and/or controller to the:

 RS-232 terminal block (see Section 8.3.2)

 Ethernet connector (see Section 8.3.3)

11. Connect the power cord (not shown in Figure 4).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 79 80

Sin comentarios

Kramer-electronics VP-773AMP Manual de usuario Pagina 18