Kramer-electronics PL-50 Manual de usuario Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
Connecting the PL-50 Power Controller - Monitor
13
6.3 Controlling via the Embedded Web Pages
The embedded Web page can be used to remotely operate the PL-50 via the
Ethernet (see section
6.2).
6.3.1 Setting the Embedded Web Page
Before you use the embedded Web pages to control the PL-50 via the
Ethernet, check that the Javasoftware is installed on your computer. If not,
download it from:
www.java.com.
A description of each Web page appears if you hover with your mouse over the
question mark that appears on the left side of the screen.
To control the PL-50 via the embedded Web page, make sure that it is
connected to the Ethernet port of your computer and do the following:
1. Open your Internet browser.
2. Type the unit’s IP number
1
in the address bar of your browser (or the name, if
using DHCP):
Figure 11: Typing the IP Number
The following window appears:
Figure 12: Loading the Embedded Web Pages
1 The default IP number is 192.168.1.39, and may be changed by the system integrator
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Comentarios a estos manuales

Sin comentarios