Kramer Electronics FC-5 Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 25
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
16 FC-5 - Using the FC-5
6.3 Transmitting Commands via the Relays
You can use your FC-5 to transmit commands via the relays:
Figure 15: Transmitting Commands via the Relays
A PC or Remote Controller is connected to the COM1 port. Relay 1 is connected
to the blinds, and relay 2 is connected to the lighting system. On each 3-pole
terminal block connector, connect either: C to NO, or C to NC
Figure 16: Relay Pinout
C Common
NO Normally Open (that is, the electricity is switched ON)
NC Normally Closed (that is, the electricity is switched OFF)
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Comentarios a estos manuales

Sin comentarios