Kramer-electronics VM-4HDCPxl Manual de usuario descargar pdf (Pagina 6)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your VM-4HDCPxl 1:4 DVI Distributor

3.3 Recommendations for Best Performance

To achieve the best performance:

• Connect only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching,

and elevated noise levels (often associated with low quality cables)

• Avoid interference from neighboring electrical appliances and

position your VM-4HDCPxl away from moisture, excessive

sunlight and dust

4 Your VM-4HDCPxl 1:4 DVI Distributor

Table 1 and Figure 1 define the VM-4HDCPxl.

Table 1: VM-4HDCPxl 1:4 DVI Distributor Features

Feature

Function

1 POWER LED The green LED is illuminated when the unit is turned ON

EDID

Buttons

READ

1. To show the EDID status, press READ

2. To acquire the EDID, press the EDID SELECT button, then

press READ

3 SELECT Press to select the EDID mode (One Output, Default or Auto-

mix)

4 OUTPUT STATUS LEDs

(from 1 to 4)

LEDs illuminate when an output(s) is connected and active;

LEDs flash to indicate the type of EDID acquired (see section

or when a non-HDCP display is connected while HDCP content

is provided to the VM-4HDCPxl

5 INPUT DVI Connector Connects to the DVI source

6 OUTPUT DVI Connectors Connects to a DVI acceptor (from 1 to 4)

7 FOR PROGRAMMING

9-pin D-sub Port

For service use only (see section 7.4)

8 Power Connector with

Fuse

AC connector enabling power supply to the unit

9 POWER Switch Illuminated switch for turning the unit ON or OFF

1 Illuminates when configuring the EDID

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Kramer-electronics VM-4HDCPxl Manual de usuario Pagina 6