Kramer-electronics VM-4HDCPxl Manual de usuario descargar pdf (Pagina 12)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Technical Specifications

3. Carefully move the jumper to the PROGRAMMING position (to the left

when the front panel of the machine is facing towards you)

4. Connect the RS-232 9-pin D-sub port on the unit via a crossed cable (pin 2

to pin 3, pin 3 to pin 2, and pin 5 to pin 5) to the RS-232 9-pin D-sub port on

the PC. If a shielded cable is used, connect the shield to pin 5.

Note: There is no need to connect any other pins.

Figure 4: RS-232 Crossed Cable Connection

8 Technical Specifications

Table 2 includes the technical specifications

Table 2: VM-4HDCPxl Technical Specifications

of the VM-4HDCPxl:

INPUT: 1 DVI, 1.2Vpp on a DVI Molex 24-pin (F) connector; DDC signal 5Vpp (TTL)

OUTPUTS: 4 DVI, 1.2Vpp on DVI Molex 24-pin (F) connectors; DDC signal 5Vpp (TTL)

BANDWIDTH: Supports up to 2.25Gbps bandwidth per graphic channel

CONTROLS: EDID SELECT, EDID READ

INDICATOR LEDs: OUTPUT STATUS LEDs

POWER SOURCE: 100-240V AC, 50/60Hz 17VA

DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable

WEIGHT: 2.5kg (5.5lbs) approx.

ACCESSORIES: Power cord, rack ears

OPTIONS: DVI/DVI male-to-male cables, Fiber Optic DVI Cable (C-FODM/FODM)

1 Upon completion of firmware upgrade, move the jumper to the right side (to the NORMAL position)

2 Specifications are subject to change without notice

1 2 ... 7 8 9 10 11 12 13 14

Sin comentarios

Kramer-electronics VM-4HDCPxl Manual de usuario Pagina 12