Kramer-electronics VM-4DP Manual de usuario descargar pdf (Pagina 12)

VM-4DP - Acquiring an EDID

6 Acquiring an EDID

The VM-4DP initially operates with the default EDID. This means that you can turn ON

the power before connecting any of the acceptors or the source.

You can acquire the EDID from:

 The default EDID, see Section 6.1

 A connected output, see Section 6.2

6.1 Acquiring the Default EDID

To acquire the default EDID, do the following:

1. Press the SELECT button, as required, to reach a disconnected output.

The selected output LED flashes.

2. Press the READ button.

The READ button flashes.

The new EDID of the selected output is stored in the non-volatile memory

and passed to the input when the READ button no longer flashes.

6.2 Acquiring the EDID from a Connected Output

To acquire the EDID, from a selected output, do the following:

1. Press the SELECT button, as required, to reach the desired connected

output from which you want to acquire the EDID.

The selected output LED flashes.

2. Press the READ button.

The READ button flashes.

The new EDID of the selected output is stored in the non-volatile memory

and passed to the input when the READ button no longer flashes.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Kramer-electronics VM-4DP Manual de usuario Pagina 12