Kramer Electronics Typewriter SV-552 Manual de usuario descargar pdf (Pagina 9)

Overview

Description

5 Connect the appropriate wiring—STP, BC-DGKat524 or

BC-DGKat-623, and BCP-2S-25—from the wall plates and the room

controller, and from the SV-552 to the speakers.

6 Install the projector and the screen. Connect the projector to the

SV-552 video outputs using the supplied video cables. Connect the

RS-232 cable between the SV-552 and the projector.

7 Turn on the SV-552 and the projector. By choosing the input

channels on the SV-552 (from the front panel buttons) and on the

projector you should be able to switch between inputs connected to

the different wall plates.

8 Load the control program on to the SV-552 via its PROGRAM port.

For additional information regarding how to program the SV-552,

refer to the separate online “K-Config Software Guide”

http://www.kramerelectronics.com. You should now be able to control

the SV-552 programmed functions from the RC-63DL.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 44 45

Sin comentarios

Kramer Electronics Typewriter SV-552 Manual de usuario Pagina 9