Kramer Electronics Typewriter SV-552 Manual de usuario descargar pdf (Pagina 32)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Wiring the TP Line In/Line Out Connectors

8 Wiring the TP Line In/Line Out Connectors

STP cabling

with a length of 15.2m (50ft) in length is available for use with

the Kramer A/V SummitView™ systems for connecting to the SV-301xl/302

Wall Plates. When required, longer STP cabling can be used when purchased

for standalone wall plates but we recommend a maximum transmission range

of 30m (100ft). Exceeding the recommended distance may result in reduced

image quality.

Connecting the SV-306/307 requires BC-DGKat524 or BC-DGKat-623

cable (see

Section 8.3

This section describes how to connect the rear panel for the:

• US wall plate versions (see

Section 8.1

• European wall plate versions (see

)

Section 8.2

)

8.1 Wiring the Twisted Pair RJ-45 Terminals (U.S.)

The U.S. versions of the wall plates are equipped with RJ-45 terminals.

Table 14 defines the TP pinout, using a straight pin to pin cable with RJ-45

connectors. When using STP cable, connect/solder the cable shield to the RJ-45

connector shield.

1 Plenum-rated for the SummitView™ US version; non-plenum for the SummitView™ Europe

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 44 45

Sin comentarios

Kramer Electronics Typewriter SV-552 Manual de usuario Pagina 32