Kramer-electronics VP-460 Manual de usuario descargar pdf (Pagina 25)

20 VP-460 - The OSD Menu

5.3 The Audio Menu

Figure 12: Audio Menu

Setting Function

Volume

Set the volume level [dB], see Figure 13 E. Set the:

Input Volume [dB] – to adjust the audio input level

Output Volume [dB] – to adjust the audio output level

The output audio level can also be set via the + and – buttons on the front

panel buttons (when not in the OSD mode) and/or the IR remote control

transmitter buttons (see

Section 7.3

Balance

)

Set the balance [ratio] E

Treble

Set the treble [dB] E

Bass

Set the bass level [dB] E

Lip Sync

Set the Lip Sync delay value [msec] E

SDI Channeling Set the SDI channeling for groups A, B, C and D and connect the active

channels (see Section 5.3.1

By default, group A is connected and groups B, C and D are disconnected

) E.

Set the SDI channeling for groups A, B, C and D to: Activate CH1 or

Activate CH2

If other groups are set to Activate, the remaining groups are read as

None

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 60 61

Sin comentarios

Kramer-electronics VP-460 Manual de usuario Pagina 25