Kramer-electronics PL-50 Manual de usuario descargar pdf (Pagina 25)

Connecting the PL-50 Power Controller - Monitor

6.3.6 The Power Measurement Screen

Figure 21 and Table 7 define the Power Measurement screen:

Figure 21: The Power Measurement Screen

Table 7: The Power Measurement Screen Features

Feature

Function

Power Status Status indicator per channel:

Measured – if the standby and active values are available (Channel 4 in this

example)

Not Measured – if one or both of the values were not measured (for

example, Channel 1)

Power Measurement Click Standby or active to measure the standby and/or Active values for an

outlet connected to a channel (once measured, the status changes from

“Not Measured” to “Measured”)

Click clear to clear the Standby and Active data for that channel

HELP BOX

This page lets you start the "Standby" and "Active" mode measurement

process. You can also clear the current "Standby" and "Active" thresholds.

1 You can also reset the data for all the channels by pressing the reset button located on the rear panel of the machine (see

Figure 2 and Figure 3) and plugging the power ON while pressing

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Sin comentarios

Kramer-electronics PL-50 Manual de usuario Pagina 25