
Operating the FC-21ETH, FC-22ETH and
FC-24ETH Remotely via the Web Pages
7 Operating the FC-21ETH, FC-22ETH and
FC-24ETH Remotely via the Web Pages
The embedded Web pages can be used to remotely operate the FC-21ETH,
FC-22ETH and FC-24ETH using a Web browser and an Ethernet connection.
Before attempting to connect:
Perform the procedures in Section 6.1.
Ensure that your browser is supported (see Section 9)
Note: The FC-24ETH is used throughout this chapter as an example. The same
principles apply to the FC-21ETH and the FC-22ETH.
7.1 Browsing the FC-24ETH Web Pages
To browse the FC-24ETH Web pages:
1. Open your Internet browser.
2. Type the device’s IP number (see Section 10) in the Address bar of your
browser.
The Loading page appears followed shortly by the General Info page shown in
Figure 14.
The General Info page displays the following:
Model Name
Firmware version
Device serial number
Web page version
Comentarios a estos manuales