Kramer Electronics 850 Manual de usuario descargar pdf (Pagina 16)

850 - Operating the 850 Pattern Generator

5.2 Operating the 850 Using the Control Application

The 850 Control Application is a PC-based program which lets you program and

control the device.

To use the 850 Control Application you must download and install the USB driver

and the 850 Control Application.

Note: The USB driver is not supported by Windows 64 bit systems.

5.2.1 Connecting to the Device

To connect to the device:

1. Run the Control Application by clicking Start > Programs > Kramer

Electronics > 850.

2. Click the Connect button.

The Connection Method window is displayed as shown in Figure 7.

Figure 7: Connection Method Window

3. Select the required connection method (via a serial or USB connection) by

clicking the relevant radio button.

4. For a serial connection, select the required Com port from the drop-down

list.

5. For a USB connection, select the required USB device from the drop-down

list.

To view an up-to-date list of available USB ports, press the Refresh Ports

button.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

Sin comentarios

Kramer Electronics 850 Manual de usuario Pagina 16