Kramer Electronics VM-12HDCP Manual de usuario Pagina 10
- Pagina / 16
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
VM-12HDCP - Connecting the VM-12HDCP
7
5 Connecting the VM-12HDCP
Always switch off the power to each device before connecting it to your
VM-12HDCP. After connecting your VM-12HDCP, connect its power
and then switch on the power to each device.
To connect the VM-12HDCP as illustrated in the example in Figure 2, do the
following:
1. Connect a DVI source (for example, a computer) to the INPUT connector.
We recommend that you always use the same color-space at the input
to reduce the transient effect while changing the input source.
2. Connect up to 12 OUTPUT connectors (not all outputs need to be connected)
to up to 12 DVI acceptors. For example:
OUTPUT 1 connector to DVI acceptor 1 (for example, a projector)
OUTPUT 12 connector to DVI acceptor 12 (for example, a display)
3. Connect the power cord to the mains electricity (not shown in Figure 2).
To use the VM-12HDCP, do the following:
1. Turn ON the POWER.
2. Acquire the EDID (see Section 6).
i
i
Relacionado con productos y manuales para Amplificadores De Línea De Vídeo Kramer Electronics VM-12HDCP
(11 paginas)
(10 paginas)Jonsered LM2150SM manuels
Manuels d'utilisation et guides de l'utilisateur pour Matériel de jardinage Jonsered LM2150SM.
Nous fournissons des manuels en pdf 1 Jonsered LM2150SM à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentarios a estos manuales