Operating the VP-501xl/VP-502xl
9
8.2 Adjusting the Display via the Menu Buttons
The set of menu buttons (MENU, ENTER, − and +) let you adjust the
screen settings. Use the menu buttons as follows:
• Press the MENU
1
• Press the MENU button again each time you want to return to the
previous menu level or exit the menu
button to display the menu on the screen
• Press the + or - buttons to move up or down the menu respectively
• Press ENTER to accept changes
• Before exiting the menu, you can save settings
2
8.3 Using the Menu
Using the main menu, you can adjust the screen display
3
. After pressing the
MENU button
4
, the main Menu
5
appears on the screen. Use the menu
buttons to scroll through the menu and make the required adjustments.
Table 3
defines the menu items.
Table 3: VP-501xl/VP-502xl Menu Items
Picture Setup Set the Contrast, Brightness, Sharpness and Saturation levels;
Set the Flicker Filter for flicker reduction
6
TV Output Setup
Set the H Center, H Width, V Center and V Height levels
VGA Input Setup Set the VGA Left, VGA Width, VGA Top and VGA Bottom levels
Zoom Set the zoom to ON to zoom the image; when the zoom is selected, pan the H and V position
Advanced Select from seven different Test Patterns (for example, see Figure 7);
Select a test pattern to appear when no input is connected; and
Save up to 4 setups
2
and recall
7
Information
them
Verifies the V Total Line, the H Timing, V Timing, and the software version
1 Pressing the MENU button disables the quick-set buttons (AUTO IMAGE, FREEZE and OS/US)
2 See section
8.5
3 Screen adjustments apply to both CV and Y/C displays
4 Quick set-buttons are disabled
5 The menu times-out after 20 seconds of inactivity
6 The flicker filter essentially blends the value of vertically adjacent pixels to decrease the differences in adjacent odd/even
lines. This dramatically reduces the noticeable image flicker, but equally as noticeably reduces the level of vertical detail as
compared to the original computer display.
7 To have a recalled setup appear after power cycling, you have to save that recalled setup once again before powering down
the unit, since the unit “remembers” the last setting that was saved
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales