Kramer-electronics 6502 Manual de usuario descargar pdf (Pagina 7)

Connecting the 6502 4x1 S/PDIF Switcher / DA

5 Connecting the 6502 4x1 S/PDIF Switcher / DA

To connect the 6502 4x1 S/PDIF Switcher / DA, as illustrated in the example

in Figure 2, do the following

1. Connect

up to four digital audio sources (for example, DVD players) to the

INPUT RCA connectors (from 1 to 4).

2. Connect

the OUTPUT RCA connectors to up to two digital audio acceptors

(for example, power amplifiers).

3. If required, connect a PC and/or controller to the RS-232 port (see section

5.1).

4. Connect the 5V DC power adapter to the power socket and connect the

adapter to the mains electricity (not shown in Figure 2).

Figure 2: Connecting the 6502 4x1 S/PDIF Switcher / DA

1 Switch OFF the power on each device before connecting it to your 6502. After connecting your 6502, switch on its power

and then switch on the power on each device

2 You do not have to connect all the inputs or outputs

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Kramer-electronics 6502 Manual de usuario Pagina 7