Kramer-electronics VM-8H Manual de usuario descargar pdf (Pagina 13)

Connecting the VM-8H 1:8 HDMI Distributor

the EDID of the connected output.

The EDID of the selected output is stored in the non-volatile memory

when the READ button no longer illuminates.

6.1.2 Acquiring the Default EDID

To acquire the default EDID, do the following:

1. Press the SELECT button.

The OUTPUT LEDs flash simultaneously.

2. Press the READ button.

The flashing ceases and the button illuminates. The VM-8H accesses

the default EDID.

The EDID of the selected output is stored in the non-volatile memory

when the READ button no longer illuminates.

6.1.3 Acquiring the EDID from Several Outputs

To acquire or change the EDID via several connected outputs, do the

following:

1. Press the SELECT button.

The OUTPUT LEDs flash in sequence.

2. Press the READ button.

The flashing ceases and the button illuminates. The VM-8H accesses

the EDID of the connected outputs.

The EDID is stored in the non-volatile memory when the READ

button no longer illuminates.

1 2 ... 8 9 10 11 12 13 14 15 16

Sin comentarios

Kramer-electronics VM-8H Manual de usuario Pagina 13