Kramer-electronics VM-2DH Manual de usuario descargar pdf (Pagina 9)

6 VM-2DH - Connecting the VM-2DH

4 Connecting the VM-2DH

Always switch off the power to each device before connecting it to your

VM-2DH. After connecting your VM-2DH, connect its power and then

switch on the power to each device.

To connect the VM-2DH as illustrated in the example in

Figure 2:

1. Connect a computer graphics DisplayPort source to the DP IN connector.

2. Connect the DVI OUT connector to the DVI projector.

3. Connect the HDMI OUT connector to the plasma display.

4. Connect the supplied 5V DC power adapter to the VM-2DH and to the mains

electricity.

5. Optional—acquire the EDID (see

Section 4.1

Figure 2: Connecting the VM-2DH DisplayPort to DVI/HDMI Converter

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Kramer-electronics VM-2DH Manual de usuario Pagina 9