Kramer-electronics VM-1055 Manual de usuario descargar pdf (Pagina 20)

18 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1055

Note:

• Terminate unused inputs to 75, and terminate active inputs at the

connecting source

• Remember, the output signal format matches the input signal format (for

example, if the input is composite, the output is composite)

• All signal cables to each device should be of equal length (for example, the

R,G,B cables between a camera and the amplifier should be of equal length)

6.3 VM-1055 Technical Specifications

INPUTS: 1x5 component/RGBHV/composite video, 1Vpp/75 on

BNC connectors, (2 of them can be either video or SYNC

1Vpp/75 or TTL level/510)

OUTPUTS: 5x5 component/RGBHV/composite video, 1Vpp/75 on

BNC connectors (2 of them can be either video or SYNC

1Vpp/75 or TTL level/510)

MAX. VIDEO OUTPUT: 2Vpp

VIDEO BANDWIDTH (-3DB): 300MHz

DIFF. GAIN: 0.1%

DIFF. PHASE: 0.1Deg

K-FACTOR: <0.05%

VIDEO S/N RATIO: Better than 74dB

COUPLING: DC

NON-LINEARITY: 0.1%

POWER SOURCE: 230V AC 50/60Hz (115V USA), 5.3VA

OPERATING

TEMPERATURE:

0° to +55°C (32° to 131°F)

STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F)

HUMIDITY: 10% to 90%, RHL non-condensing

DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable

WEIGHT: 2.6kg (5.7lbs) approx.

ACCESSORIES: Power cord

Specifications are subject to change without notice at http://www.kramerelectronics.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Sin comentarios

Kramer-electronics VM-1055 Manual de usuario Pagina 20