Kramer-electronics VM-3VN Manual de usuario descargar pdf (Pagina 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting Your Distribution Amplifier

5.1 Connecting Your VM-3AN Audio DA

To connect

the VM-3AN, as illustrated in the example in Figure 4, do the

following:

1. Connect the balanced stereo audio source to the INPUT terminal block

connector.

2. Connect the OUT terminal block connectors (from 1 to 3) to up to three

balanced stereo audio acceptors

(for example, power amplifiers).

3. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity (not illustrated in Figure 4).

4. If required, adjust the audio signal levels by turning the LEFT and RIGHT

level trimmers with a small screwdriver.

Figure 4: Connecting the VM-3AN Audio Distributor

1 Switch OFF the power on each device before connecting it to your VM-3AN. After connecting your VM-3AN, switch on its

power and then switch on the power on each device

2 You do not have to connect all the outputs

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

Kramer-electronics VM-3VN Manual de usuario Pagina 10