Kramer-electronics VP-790 Manual de usuario descargar pdf (Pagina 34)

VP-790 - Controlling the VP-790

7.3.1 Connecting the ETHERNET Port Directly to a PC (Crossover Cable)

You can connect the Ethernet port of the VP-790 to the Ethernet port on your PC,

via a crossover cable with RJ-45 connectors.

This type of connection is recommended for identification of the

factory default IP Address of the VP-790 during the initial

configuration.

After connecting the Ethernet port, configure your PC as follows:

1. Right-click the My Network Places icon on your desktop.

2. Select Properties.

3. Right-click Local Area Connection Properties.

4. Select Properties.

The Local Area Connection Properties window appears.

5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see

Figure 13).

Figure 13: Local Area Connection Properties Window

6. Select Use the following IP Address, and fill in the details as shown in

Figure 14. You can use any IP address in the range 192.168.1.1 to

192.168.1.255 (excluding 192.168.1.39) that is provided by your IT

department.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 46 47

Sin comentarios

Kramer-electronics VP-790 Manual de usuario Pagina 34