Kramer-electronics VP-790 Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 27
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
22 VP-790 Warp Generator - Preparing a Grid
Figure 21: Local Area Connection Properties Window
6. Select Use the following IP Address, and fill in the details as shown in
Figure 22. You can use any IP address in the range 192.168.1.1 to
192.168.1.255 (excluding 192.168.1.39) that is provided by your IT
department.
7. Click OK.
Figure 22: Internet Protocol (TCP/IP) Properties Window
5.4.1.2 Connecting the Ethernet Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the VP-790 to the Ethernet port on a network
hub or network router, via a straight-through cable with RJ-45 connectors.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27

Comentarios a estos manuales

Sin comentarios