Kramer-electronics VP-438 Manual de usuario descargar pdf (Pagina 7)

VP-438 - Overview

3 Overview

The Kramer VP-438 is a high-quality presentation switcher and scaler. It accepts

one of 10 inputs: four HDMI signals, two computer graphics signals on 15-pin HD

connectors, two composite video signals on RCA connectors and two component

video signals (also known as Y, Pb, Pr, Y, Cb, Cr and YUV; compatible with both

SD and HD component) on RCA connectors. It scales the video, embeds the

audio, and outputs the signal to the HDMI output, as well as to a computer

graphics output and an RGBHV video output with digital audio and analog stereo

audio outputs.

The VP-438 Presentation Switcher/Scaler:

 Is HDTV compatible and the resolution can be up- or down-scaled

 Is HDCP compliant, the HDCP (High Definition Content Protection) license

agreement allows copy−protected data on the HDMI input to pass only to the

HDMI output

 Output signal is available in three formats: 1 HDMI and 2 RGBHV (on 5 BNC

connectors, and one 15−pin HD connector)

 Has analog audio inputs, which include volume control, and digital (S/PDIF)

and analog stereo audio outputs

 Automatically detects and selects the audio source for the HDMI input.

Default selection is HDMI – if this is not present, then the machine uses the

audio from the analog input

 Comes with an On-Screen Display (OSD) for easy setup and adjustment,

accessible via the IR remote control and via the front-panel buttons

 Has a non-volatile memory that retains the last settings used

 Supports firmware upgrade via RS-232

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Sin comentarios

Kramer-electronics VP-438 Manual de usuario Pagina 7