Kramer-electronics VP-729 Manual de usuario descargar pdf (Pagina 14)

VP-729 - Connecting the VP-729 9

5 Connecting the VP-729

Always switch off the power to each device before connecting it to your

VP-729. After connecting your VP-729, connect its power and then

switch on the power to each device.

To connect the VP-729 as illustrated in the example in

Figure 3, do the following:

1. Connect the video sources:

 A component video source (for example, a DVD player) to the

UNIV. IN 1 RCA connectors, Y/CV, P

B/C and PR

Component video is sometimes called YUV, or Y, B-Y, R-Y

 An s-Video source (for example, a DVD player) to the UNIV. IN 4 RCA

connectors, Y/CV and P

B/C

 A computer graphics source to the UXGA 1 IN 15-pin HD computer

graphics video connector

 An HDMI source (for example, a DVD player) to the HDMI 1 IN connector

 A graphics data source (for example, JPEG files, that should be smaller

than 1MB and should not exceed a resolution of 2048x1536, from a PC

or a USB flash drive) to the USB connector on the front panel of the

machine

2. Connect the unbalanced stereo or digital audio sources:

 The audio of the component video source 1 to the AUDIO UNIV IN 1

S/PDIF RCA connector

 The audio of the s-Video source 4 to the AUDIO UNIV IN 4 L and R

RCA connector

 The audio of computer graphics source to the AUDIO UXGA 1 3.5mm

mini jack

Although this connecting example shows only several inputs that are connected,

you can connect all the inputs simultaneously

3. Connect the video outputs:

 The HDMI OUT connector to an HDMI acceptor (for example, a plasma

display)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 66 67

Sin comentarios

Kramer-electronics VP-729 Manual de usuario Pagina 14