
VP-441 - Controlling the VP-441
6.2.2 The FINETUNE Menu
Set the sharpness of the picture
Select the noise reduction: OFF, HI, LOW and MID
(middle)
Set to ON to enable color filtering
Set the horizontal position of the picture
Set the vertical position of the picture
When set to ON, auto adjusts the image (centers it
correctly on the screen) every time the input is
switched to VGA or when the input resolution changes
Alternatively, you can auto adjust the image by pressing
the ENTER button when not within the OSD menu
Set to ON to enable color filtering
Set to ON to enable color filtering
Set it to ON to eliminate the green line (default is OFF)
With some sources (mostly Apple devices) a green line
sometimes appears at the bottom of the display. By factory
default this option is set to OFF.
COLOR FILTER may improve the output image for certain graphic
cards where color fringing is seen.
6.2.3 The AUDIO Menu
Set the output volume (from 0 to 100)
Not applicable for embedded HDMI inputs
Set the input volume (from 0 to 100)
Not applicable for embedded HDMI inputs
Select the audio delay time: OFF, 40ms, 110ms and 150ms
Select the sound options: ON, MUTE
Select the action that will be followed by mute:
INDEPENDENT: the audio muting is independent of the FREEZE and
BLANK functions
FREEZE
BLANK
FREEZE/BLANK: when freezing or blanking the video, the audio will be
muted (the MUTE function follows the FREEZE and the BLANK
functions)
Comentarios a estos manuales