Kramer-electronics RC-IR2 Manual de usuario descargar pdf (Pagina 19)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

The Router Mode Keys

Table 6: Audio Output Type Key for the VP-23N/VP-23RC

Press key: To adjust the audio level of the:

1 CV group

2 s-Video group

3 VGA group

4 Microphone

5 Master audio out

Decreasing the Volume of the VP-23N

To increase the volume, point the remote control transmitter at the remote

receiver and do the following:

1. Press the VOL- key.

2. Press the numeral key defining the audio signal

continuously until the volume

decrease is satisfactory.

7.4.2 Controlling the VP-26 via the RC-IR2

You can control the VP-26 Presentation Switcher using the RC-IR2 to do the

following:

 Switch inputs to outputs (see section 7.4.2.1)

 Adjust the volume (see section 7.4.2.2)

7.4.2.1 Switching an Input to an Output

The VP-26 Presentation Switcher includes four independent switchers and

one Master audio switcher. Each independent switcher has two outputs and

the remote controller defines the groups as illustrated in Table 7.

Figure 5: VP-26 Switcher Selector Buttons

The independent switchers are defined in groups, as described in Table 7. The

Master audio is defined as Group 1.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Kramer-electronics RC-IR2 Manual de usuario Pagina 19