Kramer-electronics RC-54DL Manual de usuario descargar pdf (Pagina 14)

12 RC-54DL - Front Panel Button Caps and Labels

7.1 Installing the Front Panel Button Caps, Labels

To install the button caps and labels:

1. Remove the required labels from the supplied button label sheet.

2. Hold the button cap so that it is oriented as shown in

Figure 7 with the

“wings” on the left and right sides.

Figure 7: Button Cap Orientation

3. Insert the label inside the cap.

Figure 8: Button Cap Orientation with Label

Note that the button cap for the top left-most button on the front panel

should be oriented with the “wings” at the top and lower sides as shown

below (without / with label):

and then placed over the top left-most button, as illustrated in

Figure 9

4. Retaining the orientation, place the button cap over the buttons of the

RC-54DL.

Figure 9: Placing the Button Cap

OFF

1 2 ... 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Kramer-electronics RC-54DL Manual de usuario Pagina 14