Kramer-electronics PT-4iREX Manual de usuario descargar pdf (Pagina 9)

6 PT-4iREX - Connecting the PT-4iREX

4 Connecting the PT-4iREX

Always switch off the power to each device before connecting it to your

PT-4iREX. After connecting your PT-4iREX, connect its power and

then switch on the power to each device.

To connect the PT-4 iREX IR Repeater, as illustrated in the example in

Figure 3,

do the following:

1. Connect the OUT (up to four IR receivers) 3.5mm mini connector (from 1 to

4) to the following IR receivers via the IR emitter cable (see

Figure 2):

Stick the IR emitter to the IR receiver window (usually located on the front panel of the

video player).

 OUT 1 to a DVD player

 OUT 2 to a video player

 OUT 3 to an amplifier

 OUT 4 to a plasma display

2. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity.

Figure 2: Connecting the IR Emitter

To operate any of the connected machines, use a remote control (the machine’s

original remote control or a universal remote control) pointed to the IR Repeater

(or the external IR remote receiver, model C-A35M/IRR-03) that is located at a

place of your convenience. The IR signal from the remote control is transmitted

from the PT-4 iREX, via an IR emitter cable, to the appropriate machine.

IR Emitter

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Kramer-electronics PT-4iREX Manual de usuario Pagina 9