Kramer-electronics PL-18 Manual de usuario descargar pdf (Pagina 9)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Operating the PL-18 Control Port Expander

6 Operating the PL-18 Control Port Expander

The PL-18 is typically used to expand the number of ports available to an

RC series remote control device. The combined RC

and PL-18 are

configured from the RC device using RC-SV software that can be

downloaded from the Kramer Web site

The PL-18 can also be operated directly from a PC, touch screen system, or

other serial controller using the serial commands of Kramer’s Protocol

3000. For an explanation of all control commands, see section

In addition to operating the PL-18, machine software can be upgraded, and

device parameters can be accessed and changed using P3K Wizard software

also available from the Kramer Web site

(see section 10).

7 Technical Specifications

The PL-18 technical specifications are shown in Table 2:

Table 2: PL-18 Control Port Expander Technical Specifications

PORTS:

2 bi-directional RS-232 ports on terminal block connectors; 1 USB

OUTPUTS: 4 relays on terminal block connectors, 36V AC or DC, 1A, 60V AC max on non-

inductive load; 2 IR outputs on 3.5mm mini jack connector

LED INDICATORS: ON (green), RS-232 (Tx - red and Rx - green), IR (green), relays (green)

POWER SOURCE: 5V DC, 260mA

DIMENSIONS 12cm x 7.6cm x 2.4cm (4.72" x 2.97"x 0.96") W, D, H

WEIGHT: 0.6kg (1.4lbs)

ACCESSORIES: Power supply 5V DC

OPTIONS: 15 meter and 20 meter IR emitter extension cables

1 When configuring an RC-2 to work with the PL-18, the RC-SV software version must be at 2.1.2.32 or higher and the RC-2

firmware version must be at 1573 or higher

2 At www.kramerelectronics.com

3 Specifications are subject to change without notice

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Sin comentarios

Kramer-electronics PL-18 Manual de usuario Pagina 9