Kramer-electronics RB-6 Manual de usuario descargar pdf (Pagina 18)

RB-6 - Connecting the RB-6

Figure 8: Device Properties Screen

7. Change the parameters as required.

8. To save the changes, click Save. To exit without saving the changes, click

Exit.

6.3 Connecting to the RB-6 via RS-232

You can connect to the unit via a crossed RS-232 connection, using for example,

a PC. A crossed cable or null-modem is required as shown in method A and B

respectively. If a shielded cable is used, connect the shield to pin 5.

Method A (Figure 9)—Connect the RS-232 9-pin D-sub port on the unit via a

crossed cable (only pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5 need be

connected) to the RS-232 9-pin D-sub port on the PC.

Note: There is no need to connect any other pins.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Sin comentarios

Kramer-electronics RB-6 Manual de usuario Pagina 18