Kramer-electronics SPK-C411(PAIR) Manual de usuario descargar pdf (Pagina 9)

SPK-C411 / SPK-C412 - Your Closed-back Ceiling Speakers 5

Each Closed-back Ceiling speaker is supported by a C-ring and two tile rails. The tile

rails prevent the speakers from falling if the tile itself comes out or falls apart, as

their ends catch onto the T-grid. When mounting onto the ceiling tiles, use both

supports. When mounting onto a sheetrock ceiling, the C-ring alone is used to

reinforce the ceiling material.

Be sure that the tiles can support the speaker. Smaller sized tiles or

fiberglass-type tiles cannot support the weight of the speakers.

When this is the case, the speakers will need additional support.

Figure 3 shows a schematic diagram of the Closed-back Ceiling speaker:

Figure 3: Closed-back Ceiling Speaker Schematic Diagram

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Sin comentarios

Kramer-electronics SPK-C411(PAIR) Manual de usuario Pagina 9