Kramer-electronics WP-501 Manual de usuario descargar pdf (Pagina 31)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Tab Area Settings

5.2 The Device Settings Tab

Device setting readout is possible with standalone room controllers and K-NET Master RC or Aux

K-NET devices connected with a K-NET cable to their Master RC, as defined in the Room Control

tree. Figure 40 shows the device settings tab:

Figure 40: The Device Settings Tab

1. Click Connect To Device:

The Connect window appears (see Figure 41).

2. Select the connection method to the standalone controller or Master RC.

Figure 41: Device Selection Dialog Box

Table 6: Connect Dialog Box

Feature Function

Connection

Method Area

Check to select the connection to the device via the Ethernet, USB or

Serial port

Ethernet Area IP: Type the IP address of the device to which you want to connect.

Port: shows the port number.

Factory Default Address Button: Click to reset the IP address to its

default value

USB Area Port: select the communication USB port.

Refresh Ports: click to check if there are ports ready to connect on the

Kramer device

Serial Select Port: select the communication port

UFigure 42U and UTable 7U define the device settings after connecting to the device26F

Figure 42: The Device Settings Tab (Device with Time Server Options Connected)

The actual visible settings change according to the device

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 93 94

Sin comentarios

Kramer-electronics WP-501 Manual de usuario Pagina 31