Kramer-electronics SL-1 Manual de usuario descargar pdf (Pagina 9)

Connecting the SL-1 Master Room Controller

5.2 Connecting the Ethernet Port

The Ethernet connection of the SL-1 allows you to perform all control

functions of the SL-1 over the Internet using a PC running the Kramer

Site-CTRL control program.

To connect the SL-1 to a network:

1. Connect the Ethernet port of the SL-1 to the Ethernet port on a network hub

or network router, via a straight cable with RJ-45 connectors.

2. At the other end, connect the Internet to a PC running Site-CTRL.

After connecting the Ethernet port, you have to install and configure it. For

detailed instructions on how to install and configure your Ethernet port, see

the K-Config Configuration Guide

5.3 Connecting the K-NET Port

The K-NET port is wired as shown in

Figure 4.

Figure 4: K-NET Pinout Connection

1 Available for download at the Kramer Web site: www.kramerelectronics.com

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Kramer-electronics SL-1 Manual de usuario Pagina 9