Kramer-electronics SL-12 Manual de usuario

KRAMER ELECT RONIC S LTD. USER MANUAL MODEL: SL-12 Master Room Controller P/N: 2900-000552 Rev 4

SL-12 - Connecting the SL-12 7 4 Connecting the SL-12 Always switch off the power to each device before connecting it to your SL-12. After connec

8 SL-12 - Connecting the SL-12 5. Connect the RS-232 ports as follows:  Connect RS-232 port 1 to the projector  Connect RS-232 port 3 to the pl

SL-12 - Connecting the SL-12 9 4.1 Using the RC-4 IR transmitter You can use up to two optional RC-4 IR transmitters as auxiliary control panels an

10 SL-12 - Connecting the SL-12 Status Operation in K-Config An external IR receiver is connected to IR Input 2: One RC-4 controls the unit throug

SL-12 - Connecting the SL-12 11 Figure 4: RS-232 Connection 4.4 Connecting the RS-485 Interface To connect an AV device to the SL-12 using the RS-

12 SL-12 - Operating the SL-12 2. At the other end, connect the Internet to a PC running Site-CTRL. After connecting the Ethernet port, you have to

SL-12 - Technical Specifications 13 6 Technical Specifications INPUTS: 4 RS-232, RS-485, 4 GPI/O and K-NET on terminal block connectors; Ethernet o

14 SL-12 - Technical Specifications

For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may b

SL-12 – Contents i Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 3 2.3 Recycl

SL-12 - Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative,

2 SL-12 - Getting Started 2 Getting Started We recommend that you:  Unpack the equipment carefully and save the original box and packaging materi

SL-12 - Getting Started 3 2.2 Safety Instructions Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer El

4 SL-12 - Overview 3 Overview The SL-12 is a highly versatile controller that acts as an all-in-one control processor for control of AV equipment—e

SL-12 - Overview 5 3.1 Defining the SL-12 Master Room Controller This section defines the SL-12. Figure 1: SL-12 Master Room Controller # Feature

6 SL-12 - Overview # Feature Function 8 K-NET Connector PIN GND is for the Ground connection; PIN B (-) and PIN A (+) are for RS-485, and PIN +12V